![]() |
Welcome to ftp.vim.org,
Hosted by ftp.nluug.nl Current directory: /ftp/os/NetBSD/NetBSD-current/src/external/lgpl3/gmp/dist/mpn/ia64/ |
Contents of README:Copyright 2000-2005 Free Software Foundation, Inc. This file is part of the GNU MP Library. The GNU MP Library is free software; you can redistribute it and/or modify it under the terms of either: * the GNU Lesser General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. or * the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. or both in parallel, as here. The GNU MP Library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received copies of the GNU General Public License and the GNU Lesser General Public License along with the GNU MP Library. If not, see https://www.gnu.org/licenses/. IA-64 MPN SUBROUTINES This directory contains mpn functions for the IA-64 architecture. CODE ORGANIZATION mpn/ia64 itanium-2, and generic ia64 The code here has been optimized primarily for Itanium 2. Very few Itanium 1 chips were ever sold, and Itanium 2 is more powerful, so the latter is what we concentrate on. CHIP NOTES The IA-64 ISA keeps instructions three and three in 128 bit bundles. Programmers/compilers need to put explicit breaks `;;' when there are WAW or RAW dependencies, with some notable exceptions. Such "breaks" are typically at the end of a bundle, but can be put between operations within some bundle types too. The Itanium 1 and Itanium 2 implementations can under ideal conditions execute two bundles per cycle. The Itanium 1 allows 4 of these instructions to do integer operations, while the Itanium 2 allows all 6 to be integer operations. Taken cloop branches seem to insert a bubble into the pipeline most of the time on Itanium 1. Loads to the fp registers bypass the L1 cache and thus get extremely long latencies, 9 cycles on the Itanium 1 and 6 cycles on the Itanium 2. The software pipeline stuff using br.ctop instruction causes delays, since many issue slots are taken up by instructions with zero predicates, and since many extra instructions are needed to set things up. These features are clearly designed for code density, not speed. Misc pipeline limitations (Itanium 1): * The getf.sig instruction can only execute in M0. * At most four integer instructions/cycle. * Nops take up resources like any plain instructions. Misc pipeline limitations (Itanium 2): * The getf.sig instruction can only execute in M0. * Nops take up resources like any plain instructions. ASSEMBLY SYNTAX .align pads with nops in a text segment, but gas 2.14 and earlier incorrectly byte-swaps its nop bundle in big endian mode (eg. hpux), making it come out as break instructions. We use the ALIGN() macro in mpn/ia64/ia64-defs.m4 when it might be executed across. That macro suppresses any .align if the problem is detected by configure. Lack of alignment might hurt performance but will at least be correct. foo:: to create a global symbol is not accepted by gas. Use separate ".global foo" and "foo:" instead. .global is the standard global directive. gas accepts .globl, but hpux "as" doesn't. .proc / .endp generates the appropriate .type and .size information for ELF, so the latter directives don't need to be given explicitly. .pred.rel "mutex"... is standard for annotating predicate register relationships. gas also accepts .pred.rel.mutex, but hpux "as" doesn't. .pred directives can't be put on a line with a label, like ".Lfoo: .pred ...", the HP assembler on HP-UX 11.23 rejects that. gas is happy with it, and past versions of HP had seemed ok. // is the standard comment sequence, but we prefer "C" since it inhibits m4 macro expansion. See comments in ia64-defs.m4. REGISTER USAGE Special: r0: constant 0 r1: global pointer (gp) r8: return value r12: stack pointer (sp) r13: thread pointer (tp) Caller-saves: r8-r11 r14-r31 f6-f15 f32-f127 Caller-saves but rotating: r32- ================================================================ mpn_add_n, mpn_sub_n: The current code runs at 1.25 c/l on Itanium 2. ================================================================ mpn_mul_1: The current code runs at 2 c/l on Itanium 2. Using a blocked approach, working off of 4 separate places in the operands, one could make use of the xma accumulation, and approach 1 c/l. ldf8 [up] xma.l xma.hu stf8 [wrp] ================================================================ mpn_addmul_1: The current code runs at 2 c/l on Itanium 2. It seems possible to use a blocked approach, as with mpn_mul_1. We should read rp[] to integer registers, allowing for just one getf.sig per cycle. ld8 [rp] ldf8 [up] xma.l xma.hu getf.sig add+add+cmp+cmp st8 [wrp] These 10 instructions can be scheduled to approach 1.667 cycles, and with the 4 cycle latency of xma, this means we need at least 3 blocks. Using ldfp8 we could approach 1.583 c/l. ================================================================ mpn_submul_1: The current code runs at 2.25 c/l on Itanium 2. Getting to 2 c/l requires ldfp8 with all alignment headache that implies. ================================================================ mpn_addmul_N For best speed, we need to give up using mpn_addmul_2 as the main multiply building block, and instead take multiple v limbs per loop. For the Itanium 1, we need to take about 8 limbs at a time for full speed. For the Itanium 2, something like mpn_addmul_4 should be enough. The add+cmp+cmp+add we use on the other codes is optimal for shortening recurrencies (1 cycle) but the sequence takes up 4 execution slots. When recurrency depth is not critical, a more standard 3-cycle add+cmp+add is better. /* First load the 8 values from v */ ldfp8 v0, v1 = [r35], 16;; ldfp8 v2, v3 = [r35], 16;; ldfp8 v4, v5 = [r35], 16;; ldfp8 v6, v7 = [r35], 16;; /* In the inner loop, get a new U limb and store a result limb. */ mov lc = un Loop: ldf8 u0 = [r33], 8 ld8 r0 = [r32] xma.l lp0 = v0, u0, hp0 xma.hu hp0 = v0, u0, hp0 xma.l lp1 = v1, u0, hp1 xma.hu hp1 = v1, u0, hp1 xma.l lp2 = v2, u0, hp2 xma.hu hp2 = v2, u0, hp2 xma.l lp3 = v3, u0, hp3 xma.hu hp3 = v3, u0, hp3 xma.l lp4 = v4, u0, hp4 xma.hu hp4 = v4, u0, hp4 xma.l lp5 = v5, u0, hp5 xma.hu hp5 = v5, u0, hp5 xma.l lp6 = v6, u0, hp6 xma.hu hp6 = v6, u0, hp6 xma.l lp7 = v7, u0, hp7 xma.hu hp7 = v7, u0, hp7 getf.sig l0 = lp0 getf.sig l1 = lp1 getf.sig l2 = lp2 getf.sig l3 = lp3 getf.sig l4 = lp4 getf.sig l5 = lp5 getf.sig l6 = lp6 add+cmp+add xx, l0, r0 add+cmp+add acc0, acc1, l1 add+cmp+add acc1, acc2, l2 add+cmp+add acc2, acc3, l3 add+cmp+add acc3, acc4, l4 add+cmp+add acc4, acc5, l5 add+cmp+add acc5, acc6, l6 getf.sig acc6 = lp7 st8 [r32] = xx, 8 br.cloop Loop 49 insn at max 6 insn/cycle: 8.167 cycles/limb8 11 memops at max 2 memops/cycle: 5.5 cycles/limb8 16 fpops at max 2 fpops/cycle: 8 cycles/limb8 21 intops at max 4 intops/cycle: 5.25 cycles/limb8 11+21 memops+intops at max 4/cycle 8 cycles/limb8 ================================================================ mpn_lshift, mpn_rshift The current code runs at 1 cycle/limb on Itanium 2. Using 63 separate loops, we could use the double-word shrp instruction. That instruction has a plain single-cycle latency. We need 63 loops since this instruction only accept immediate count. That would lead to a somewhat silly code size, but the speed would be 0.75 c/l on Itanium 2 (by using shrp each cycle plus shl/shr going down I1 for a further limb every second cycle). ================================================================ mpn_copyi, mpn_copyd The current code runs at 0.5 c/l on Itanium 2. But that is just for L1 cache hit. The 4-way unrolled loop takes just 2 cycles, and thus load-use scheduling isn't great. It might be best to actually use modulo scheduled loops, since that will allow us to do better load-use scheduling without too much unrolling. Depending on size or operand alignment, we get 1 c/l or 0.5 c/l on Itanium 2, according to tune/speed. Cache bank conflicts? REFERENCES Intel Itanium Architecture Software Developer's Manual, volumes 1 to 3, Intel document 245317-004, 245318-004, 245319-004 October 2002. Volume 1 includes an Itanium optimization guide. Intel Itanium Processor-specific Application Binary Interface (ABI), Intel document 245370-003, May 2001. Describes C type sizes, dynamic linking, etc. Intel Itanium Architecture Assembly Language Reference Guide, Intel document 248801-004, 2000-2002. Describes assembly instruction syntax and other directives. Itanium Software Conventions and Runtime Architecture Guide, Intel document 245358-003, May 2001. Describes calling conventions, including stack unwinding requirements. Intel Itanium Processor Reference Manual for Software Optimization, Intel document 245473-003, November 2001. Intel Itanium-2 Processor Reference Manual for Software Development and Optimization, Intel document 251110-003, May 2004. All the above documents can be found online at http://developer.intel.com/design/itanium/manuals.htm |
Name Last modified Size
Parent Directory -
CVS/ 17-Dec-2022 22:27 -
README 23-Aug-2017 05:01 9.2K
add_n_sub_n.asm 23-Aug-2017 05:01 8.2K
addmul_1.asm 23-Aug-2017 05:01 13K
addmul_2.asm 23-Aug-2017 05:01 17K
aors_n.asm 23-Aug-2017 05:01 20K
aorsorrlsh1_n.asm 22-Aug-2017 11:40 1.5K
aorsorrlsh2_n.asm 22-Aug-2017 11:40 1.5K
aorsorrlshC_n.asm 22-Aug-2017 11:40 9.7K
bdiv_dbm1c.asm 23-Aug-2017 05:01 9.1K
cnd_aors_n.asm 22-Aug-2017 11:40 6.4K
copyd.asm 23-Aug-2017 05:01 3.5K
copyi.asm 23-Aug-2017 05:01 3.3K
dive_1.asm 23-Aug-2017 05:01 6.6K
divrem_1.asm 23-Aug-2017 05:01 11K
divrem_2.asm 23-Aug-2017 05:01 6.4K
gcd_11.asm 27-Sep-2020 02:27 2.6K
gmp-mparam.h 27-Sep-2020 05:01 9.8K
hamdist.asm 23-Aug-2017 05:01 8.2K
ia64-defs.m4 23-Aug-2017 05:01 4.1K
invert_limb.asm 23-Aug-2017 05:01 3.0K
logops_n.asm 23-Aug-2017 05:01 7.0K
lorrshift.asm 23-Aug-2017 05:01 6.9K
lshiftc.asm 23-Aug-2017 05:01 8.2K
mod_34lsub1.asm 23-Aug-2017 05:01 5.0K
mode1o.asm 23-Aug-2017 05:01 11K
mul_1.asm 23-Aug-2017 05:01 11K
mul_2.asm 23-Aug-2017 05:01 15K
popcount.asm 23-Aug-2017 05:01 4.4K
rsh1aors_n.asm 23-Aug-2017 05:01 11K
sec_tabselect.asm 22-Aug-2017 11:40 3.3K
sqr_diag_addlsh1.asm 23-Aug-2017 05:01 4.6K
submul_1.asm 23-Aug-2017 05:01 12K
NLUUG - Open Systems. Open Standards
Become a member
and get discounts on conferences and more, see the NLUUG website!