[NLUUG]   Welcome to ftp.vim.org,
Hosted by ftp.nluug.nl
Current directory: /OpenBSD/2.1/pmax/X11/
Contents of README:

	this is XFree86 version 3.3 compiled for OpenBSD on mips cpu
         based machines (OpenBSD/arc, OpenBSD/pmax, OpenBSD/wgrisc)

the following x servers are part of this distribution:

* XF86_S3 -  supports S3 chipset based graphics cards on OpenBSD/arc

* Xcfbpmax - supports the cfb and sfb framebuffers on OpenBSD/pmax
             (this is an X11R5pl26 server because there are currently
             no newer servers running on OpenBSD/pmax available)

* Xmfbpmax - supports the mfb framebuffer on OpenBSD/pmax (this is
             also an X11R5pl26 server - see above)

there are four tar.gz files which contain the bin, include, lib and
man directories of the XFree86 distribution ... they all unpack
relative too the current directory into usr/X11R6/subdirname ...

to install them simple get root and change to the root directory

  su -
  cd / 

then unpack them using

  tar xvzfp some_path/XFree86-3.3-OpenBSD-mips-bin.tar.gz
  tar xvzfp some_path/XFree86-3.3-OpenBSD-mips-include.tar.gz
  tar xvzfp some_path/XFree86-3.3-OpenBSD-mips-lib.tar.gz
  tar xvzfp some_path/XFree86-3.3-OpenBSD-mips-man.tar.gz

then you will have to unpack the appropriate server tar file for your
system. there are two of them, one for pmax machines and one for arc.
do either:

  tar xvzfp some_path/X11R5pl26-OpenBSD-pmax-server.tar.gz


  tar xvzfp some_path/XFree86-3.3-OpenBSD-arc-server.tar.gz

* add /usr/X11R6/lib to the directories searched by ldconfig and rerun

    echo /usr/X11R6/lib >> /etc/ld.so.conf

* create a symbolic link from the x server you plan to use to X in
  the /usr/X11R6/bin directory:

    cd /usr/X11R6/bin
    ln -sf XF86_S3 X				(OpenBSD/arc)

  or if you have a pmax with an cfb framebuffer

    cd /usr/X11R6/bin
    ln -sf Xcfbpmax X				(OpenBSD/pmax)

  or if you have a pmax with an mfb framebuffer

    cd /usr/X11R6/bin
    ln -sf Xmfbpmax X				(OpenBSD/pmax)

* on the pmax you have to create a symlink from the framebuffer device
  (usually the first - thus fb0) to mouse in the /dev directory:

    cd /dev
    ln -sf fb0 mouse

  on arc machines you will need to create a symlink to the appropriate
  mouse device depending on the type of mouse. for PS/2 mouse (pica):

    cd /dev
    ln -sf pms1 mouse

  or for serial port mouse:

    cd /dev
    ln -sf tty01 mouse		# (usually tty01 which is the 9 pin port)

  it is also possible to select this when running xf86config on arc.

* also only on the pmax you have to do the following (because the
  X11R5 server for the pmax can't handle compressed fonts):

    cd /usr/X11R6/lib/X11/fonts
    gunzip */*.gz
    cd 100dpi; mkfontdir; cd ..
    cd 75dpi; mkfontdir; cd ..
    cd Speedo; mkfontdir; cd ..
    cd Type1; mkfontdir; cd ..
    cd cyrillic; mkfontdir; cd ..
    cd misc; mkfontdir; cd ..
    mv -f cyrillic/fonts.alias cyrillic/fonts.alias.org
    grep -v ^! cyrillic/fonts.alias.org > cyrillic/fonts.alias
    mv -f misc/fonts.alias misc/fonts.alias.org
    grep -v ^! misc/fonts.alias.org > misc/fonts.alias

* on arc systems you will need to run xf86config to create an /etc/XF86Config
  file or if you feel lucky, try one of the files in xf86config-examples.

  running xf86config is rather self explanatory and should not casue you
  any trouble if you have the information about your graphics board ready.

* for both arc and pmax, if you plan to start xdm from the rc.local file,
  remember to disable the getty on the console port.

XFree86 version 3.3 in this distribution was built by per fogelstrom
(pefo@OpenBSD.org) and the pmax X11R5pl26 x servers were built by
thomas graichen (graichen@OpenBSD.org) ... please contact them if you
have any mips specific problems running x (per for OpenBSD/arc and
OpenBSD/wgrisc and thomas for OpenBSD/pmax)

Icon  Name                                    Last modified      Size  
[DIR] Parent Directory - [   ] CKSUM 04-Jun-1997 17:12 298 [   ] MD5 04-Jun-1997 17:10 438 [TXT] README 03-Jun-1997 04:24 3.7K [   ] X11R5pl26-OpenBSD-pmax-server.tar.gz 02-Jun-1997 20:12 1.1M [   ] XFree86-3.3-OpenBSD-mips-bin.tar.gz 04-Jun-1997 16:43 1.6M [   ] XFree86-3.3-OpenBSD-mips-include.tar.gz 02-Jun-1997 20:12 352K [   ] XFree86-3.3-OpenBSD-mips-lib.tar.gz 02-Jun-1997 20:12 8.0M [   ] XFree86-3.3-OpenBSD-mips-man.tar.gz 02-Jun-1997 20:12 627K

NLUUG - Open Systems. Open Standards
Become a member and get discounts on conferences and more, see the NLUUG website!